The DC Power Controller allows for High Current Switching and Dimming.
Control items such as LED Lamps, LED Strips, 12 Volt DC Lamps, or other High-Current Loads.
By receiving its commands over PNET this power controller has an infinite range of capabilities when used with the Layout Lighting Solution primary board or a Dream Player PRO.
DC power is supplied to the controller via screw terminal strips and input power may be supplied up to 30Amps, allowing up to 8Amps to be supplied to each individual channel.
Each channel provides on-board self resetting fuses that will prevent any excessive current from being drawn on any of the channels.
PNET DC Power Controller Wiring
PNET DC Power Controller with Layout Lighting
Layout Lighting Starter Kit Assembly
Layout Lighting Software Operation
Add Optically Isolated Trigger Inputs using PNET
Need more than 4 outpus? The Hex Driver has 16 outputs at 2Amps each using PNET
You will need some PNET cables!
Always a good idea to have a spare Power Supply around
Complete PDF of the DC Power Controller Quick Start Guide
