LIGHTING PRODUCTS


Professional quality lighting controllers and DMX distribution accessories


Layout Lighting

Layout Lighting

Web browser based PNET and DMX Automated Lighting Controller

Create Lighting Sequences and Events using a web browser. Capable of controlling ANY DMX-512 device, or our line of PNET LED strip controllers. All configuration is stored on an SD card, no PC required except to configure sequences.

PNET DC Power Controller

Output Driver featuring 4 channels of control at 8 AMPs each!

Use with any PNET master to control high-current loads such as relays, LED strips, or other dimming LEDs. The 4 outputs can run in switch or dimmer mode and include a LED linear dimming curve to create realistic dimming for the Dream Player PRO or Layout Lighing boards.

PNET HEX Driver

Output Driver featuring 16 channels of control at 2 AMPs each!

Use with any PNET master to control medium-current loads such as LED strips, or other dimming LEDs. The 16 outputs can run in switch or dimmer mode and include a LED linear dimming curve to create realistic dimming for the Dream Player PRO or Layout Lighing boards.

PNET Output Controller

Output Driver featuring 4 channels of control at 400MA each

Use with any PNET master to control low-current loads such as relays, Arduino, PLC, or trigger a Dream Player. The 4 outputs run in switch mode and will not dim LED's. Add more Control Outputs to Dream Player PRO or Layout Lighing boards.

PNET OptoInput Controller

Optically Isolated Trigger Input featuring 4 trigger channels

Use with any PNET master to trigger inputs using Optically Isolated input ports. The 4 inputs will generate a PNET Trigger Event for your Dream Player PRO or Layout Lighing boards.

DMX Splitter

Four buffered DMX outputs from a single DMX input

Very Low Cost, NON Isolated 4-way DMX Splitter. Tired of having long DMX chains that fail due to one cable in the loop? This splitter is just what you need! Many low-cost or free DMX software packages limit to 2 universes. With a low universe count, every DMX drop counts. Powered from a single 9V - 24V DC power input, this simple splitter is perfect for solving those pesky wiring issues.